STATION™ Fuel Dispenser Model Guide

At Station Energy Tech, we offer different STATION™ fuel dispenser series for mobile fueling, small private sites, retail gas stations, commercial fleets, high-flow diesel fueling, container fuel stations, and cold-climate projects. Each series starts from a standard base model, but the final configuration can be adjusted based on your fuel type, nozzle quantity, flow rate, tank setup, site layout, and local market needs.

This guide is written to help you choose the right starting model before asking for a quote. You do not need to know every technical detail first. You only need to understand how the dispenser will be used, what kind of vehicles it will serve, and what level of capacity or customization your project needs.

Whether you are building a small rural station, upgrading a forecourt, fueling your own fleet, installing equipment on a fuel truck, or planning a full station project, this guide will help you compare the main STATION™ fuel dispenser series and decide which one makes the most sense for your business.

Before Choosing a Model, Start with Your Fueling Scenario

The best fuel dispenser is not always the biggest one, the newest-looking one, or the one with the most nozzles. The right choice depends on how the dispenser will actually be used every day.
Before comparing STATION™ models, start with a few simple questions.

 

✅ Are you fueling your own vehicles or selling fuel to the public?

For private use, such as farms, factories, construction sites, logistics yards, or equipment fleets, a single-nozzle or dual-nozzle dispenser may already be enough. These customers usually care more about simple installation, reliable operation, easy maintenance, and direct fueling from an above-ground tank or mobile setup.

For retail fuel stations, the dispenser also needs to support customer-facing operation. Appearance, nozzle layout, display design, receipt printing, payment options, branding, and forecourt efficiency become more important.

 

✅ How many fuel products do you need to handle?

Most customers choose nozzle quantity based on fuel products. A single-nozzle unit is usually enough for one fuel type, such as diesel-only fleet fueling. A dual-nozzle model is one of the most common choices for small stations because it can handle petrol and diesel in one unit.

Larger stations may choose four, six, or more nozzles to serve different fuel grades and more vehicles at the same time.

 

✅ What kind of vehicles will use the dispenser?

A small private car station does not need the same setup as a truck stop or mining site. For normal petrol and diesel fueling, most STATION™ retail dispenser models are built around standard flow rates.

For trucks, buses, heavy equipment, fleet depots, or high-volume diesel fueling, a high-flow model like the STATION™ 32H is a better starting point.

 

✅ Where will the dispenser be installed?

A modern retail gas station with underground tanks usually needs a submersible-type dispenser. A small site with an above-ground tank, remote location, or simple installation requirement may prefer a suction-type pump with a built-in pump inside the dispenser.

 

✅ What level of customization do you need?

The models shown on our website are base series. In real projects, many customers customize the cabinet color, logo, nozzle layout, hose length, display, keyboard, printer, payment terminal, vapor recovery system, fuel management system, or flow rate.

STATION™ Fuel Dispenser Series Overview

STATION™ fuel dispensers are built around different fueling needs, from mobile delivery and private fueling to retail forecourts, commercial fleets, high-flow diesel operation, and cold-climate stations.

The overview below shows where each model fits best, so you can narrow down the right model before moving into detailed configuration. For full specifications, configuration options, and available upgrades, click into the individual product pages.

 

Mobile Series

20f-Mobile-Fuel-Dispenser

STATION™ 20F Mobile Fuel Dispenser

Mobile Fueling Without a Full Station Setup


The STATION™ 20F is a compact mobile fuel dispenser built for fuel trucks, skid tanks, private fueling, and remote job sites. It is a practical choice when you need to bring fuel directly to vehicles or equipment instead of building a fixed forecourt.

Key Highlights:

  • · Mobile-ready design — ideal for fuel delivery trucks, skid-mounted tanks, and field fueling
  • · Lowest-cost mobile option — a budget-friendly starting model for private or commercial mobile fueling
  • · Simple to install and operate — suitable for farms, construction sites, fleets, and remote locations
View Details

 

Small Series

10s-Commercial-Fuel-Dispenser

STATION™ 10S Small Fuel Dispenser

The Simple Single-Nozzle Workhorse


The STATION™ 10S is a small fuel dispenser for buyers who need a low-cost fixed fueling unit. It is a strong fit for internal fueling at farms, factories, construction sites, logistics yards, and other private-use locations.

Key Highlights:

  • · Lowest-cost fixed model — a practical starting point for simple single-nozzle fueling
  • · Compact footprint — easy to place near above-ground tanks, workshops, or equipment yards
  • · Built for internal use — ideal for vehicles, machinery, and daily site equipment fueling
View Details
32q-Commercial-Fuel-Dispenser

STATION™ 32Q Portable Fuel Dispenser

Affordable Fueling for Portable Sites


The STATION™ 32Q is a portable fuel dispenser for sites that need more flexibility than a basic single-nozzle unit. It works well for container fuel stations, skid-mounted tanks, self-bunded tanks, construction sites, mines, fleet yards, and emergency fuel supply.

Key Highlights:

  • · Cost-friendly portable option — suitable for buyers who need a compact setup on a smaller budget
  • · Portable station fit — works well with container, skid-mounted, and self-bunded fuel systems
  • · Easy relocation — practical for temporary, remote, or project-based fueling sites
View Details
32p-Retail-Fuel-Dispenser

STATION™ 32P Small Fuel Dispenser

Small Footprint, Real Forecourt Look


The STATION™ 32P is a small fuel dispenser with a more modern retail appearance. It is designed for tight forecourts, convenience stores, and small stations that want a professional pump look without using a full-size dispenser.

Key Highlights:

  • · Mini forecourt design — gives small sites a cleaner, more retail-ready appearance
  • · Space-saving body — built for stations where layout and footprint matter
  • · Single or dual-nozzle setup — useful for small retail or private fueling needs
View Details

Retail Series

32a-Retail-Fuel-Dispenser

STATION™ 32A Retail Fuel Dispenser

Entry-Level Retail Fueling for Small Stations


The STATION™ 32A is a practical retail fuel dispenser for small fuel stations, rural stations, and new retail projects. It keeps the design simple, the operation familiar, and the equipment cost easier to control.

Key Highlights:

  • · Most affordable retail model — a smart starting point for small fuel stations
  • · Simple proven design — easy for attendants to operate and maintain
  • · Single or dual-nozzle setup — suitable for one fuel product or petrol + diesel layouts
View Details
32l-Retail-Fuel-Dispenser

STATION™ 32L Retail Fuel Dispenser

Cleaner Forecourt, Clearer Pump Status


The STATION™ 32L is a modern retail fuel dispenser for small and medium stations. Its canopy-mounted status lighting and overhead hose layout help the forecourt look cleaner and make pump status easier to see during daily fueling.

Key Highlights:

  • · Visible pump status — canopy lights help staff and drivers see pump activity faster
  • · Cleaner hose layout — overhead routing keeps the dispenser area neater
  • · Retail-ready appearance — a good upgrade from basic small-station dispensers
View Details
56a-Retail-Fuel-Dispenser

STATION™ 56A Retail Fuel Dispenser

Budget-Friendly Multi-Nozzle Retail Fueling


The STATION™ 56A is a full-size retail fuel dispenser for stations that need more fueling capacity without moving into a premium model. It is a strong choice for operators who want 4 or 6 nozzles at a more controlled equipment cost.

Key Highlights:

  • · Lowest-cost multi-nozzle option — ideal for buyers entering the 4–6 nozzle range
  • · Full-size forecourt body — suitable for standard retail fuel station projects
  • · Flexible fuel layout — supports multi-product fueling from one dispenser island
View Details
56l-Retail-Fuel-Dispenser

STATION™ 56L Retail Fuel Dispenser

Better Forecourt Image Without Overspending


The STATION™ 56L is a retail fuel dispenser for stations that want a stronger visual presence than basic models. It balances modern styling, LED status lighting, multi-nozzle capability, and practical daily operation.

Key Highlights:

  • · Premium forecourt presence — gives the station a more modern and professional look
  • · Smart LED lighting — improves pump visibility and customer-facing presentation
  • · Up to six nozzles — suitable for busier retail stations and multi-product layouts
View Details

Forecourt Series

56m-Retail-Fuel-Dispenser

STATION™ 56M Forecourt Fuel Dispenser

Built for Multi-Fuel Forecourts


The STATION™ 56M is a forecourt fuel dispenser for stations with more fuel grades, more lanes, and higher customer traffic. Its clear grade identification and optional touchscreen display make it a strong fit for modern retail stations and C-stores.

Key Highlights:

  • · Multi-fuel layout — supports up to ten nozzles and multiple fuel grades
  • · Clear fuel identification — helps reduce misfueling in busy forecourts
  • · Retail media option — available with a touchscreen for ads and promotions
View Details
56t-Retail-Fuel-Dispenser

STATION™ 56T Forecourt Fuel Dispenser

Versatile Layout for Brand-Focused Stations


The STATION™ 56T is designed for larger retail stations that care about both fueling capacity and brand image. It gives operators a wide, full-size dispenser body with flexible nozzle layouts and multimedia display options.

Key Highlights:

  • · Wide full-size design — built for larger, more visible retail forecourts
  • · Multimedia display options — available with 15-inch or 32-inch screen setups
  • · Up to eight nozzles — suitable for high-traffic, multi-lane station layouts
View Details
62h-Retail-Fuel-Dispenser

STATION™ 62H Forecourt Fuel Dispenser

Full-Service Forecourt Presence


The STATION™ 62H is a forecourt fuel dispenser for stations that want a stronger digital experience and a more premium visual presence. It is built for operators who want the dispenser to support both fueling and customer-facing presentation.

Key Highlights:

  • · Forecourt-focused design — suitable for full-service retail station environments
  • · Better digital experience — supports larger multimedia display options
  • · Up to eight nozzles — fits larger stations with multiple fueling positions
View Details
60t-Retail-Fuel-Dispenser

STATION™ 60T Forecourt Fuel Dispenser

Premium Fueling with Built-In Digital Media


The STATION™ 60T is one of the most advanced forecourt fuel dispensers in the STATION™ lineup. It combines multi-nozzle fueling capacity with touchscreen displays, digital media functions, and a high-end station appearance.

Key Highlights:

  • · Premium forecourt model — built for stations that want a high-end pump presence
  • · Touchscreen display options — available with 15-inch or 32-inch screen setups
  • · Digital media support — useful for promotions, advertising, and customer engagement
View Details

Commercial Series

32h-High-Flow-Commercial-Diesel-Dispenser

STATION™ 32H High-Flow Diesel Dispenser

High-Speed Diesel Fueling for Heavy-Duty Sites


The STATION™ 32H is built for diesel-heavy operations where fueling speed matters. It is ideal for truck stops, fleet depots, logistics yards, bus stations, ports, mining sites, and high-volume commercial diesel stations.

Key Highlights:

  • · High-flow diesel performance — available from 100 L/min up to 300 L/min
  • · Built for heavy vehicles — suitable for trucks, buses, machinery, and large tanks
  • · Single or dual-nozzle setup — supports dedicated high-speed diesel lanes
View Details
32x-Retail-Fuel-Dispenser

STATION™ 32X Commercial Fuel Dispenser

Compact Commercial Fueling for Fleet Sites


The STATION™ 32X is a commercial fuel dispenser for fleet yards, logistics sites, factories, and private fueling operations. It focuses on durable construction, simple operation, and reliable daily use instead of decorative forecourt features.

Key Highlights:

  • · Rugged commercial build — made for frequent fleet and equipment fueling
  • · Compact footprint — helps fit more fueling capacity into limited site space
  • · Fleet management ready — works well with transaction tracking and fuel control systems
View Details
56x-Retail-Fuel-Dispenser

STATION™ 56X Commercial Fuel Dispenser

High-Capacity Fueling for Commercial Sites


The STATION™ 56X is built for larger commercial and high-volume fueling operations. It offers a stronger full-size body, up to eight nozzles, and a straightforward interface for operators who need durability, capacity, and easy service access.

Key Highlights:

  • · Designed for high-volume use — suitable for busy commercial stations and fleet sites
  • · Up to eight nozzles — supports multiple fueling positions from one dispenser island
  • · Easy service access — practical for sites that need fast maintenance and uptime
View Details

Cold-Climate Series

60l-Retail-Fuel-Dispenser

STATION™ 60L Cold-Climate Fuel Dispenser

Built for Diesel Fueling in Freezing Weather


The STATION™ 60L is a cold-climate fuel dispenser for markets where low temperatures can slow down fuel flow and affect dispenser performance. It uses insulation and heater kits to help critical components keep working in extreme winter conditions.

Key Highlights:

  • · Cold-weather protection — built for reliable operation in freezing environments
  • · Integrated heater kits — help protect meters, sensors, valves, piping, and internal parts
  • · Up to eight nozzles — suitable for larger diesel stations in cold regions
View Details

Choose by Nozzle Quantity

Nozzle quantity is one of the easiest ways to narrow down your fuel dispenser options.

Before looking at cabinet design or advanced functions, think about a simple question: how many fuel products do you need to dispense, and how many vehicles do you want to serve at the same time?

For some private fueling sites, one nozzle is enough. For small retail stations, two nozzles are often the most practical setup. For busy forecourts, four, six, or more nozzles can improve fueling efficiency and help one dispenser serve more vehicles from the same island.

 

Single-Nozzle Fuel Dispensers

A single-nozzle model is usually the right choice when the site only needs to handle one fuel product.

This setup is common for private fueling, construction sites, farms, factories, equipment yards, small fleet operations, and mobile fuel delivery trucks. If you only need to dispense diesel for your own vehicles or equipment, there is no need to pay for a larger multi-nozzle dispenser.

Need Suitable Series
Mobile fuel delivery or fuel truck setup 20F
Low-cost fixed single-nozzle fueling 10S
Compact single-nozzle private or small-site fueling 32Q / 32P
Single-nozzle retail or commercial setup 32A / 32L / 32X
Single-nozzle high-flow diesel fueling 32H

 

Dual-Nozzle Fuel Dispensers

Dual-nozzle dispensers are one of the most common choices for both small retail stations and private fueling projects.

Many customers ask for two nozzles because they want to handle one petrol line and one diesel line in the same unit. For small stations, rural stations, container fuel stations, and compact forecourts, a dual-nozzle dispenser is often enough to cover daily operation without taking up too much space or increasing the budget too much.

Need Suitable Series
Low-cost dual-nozzle setup 32Q
Small retail or private fueling 32P / 32A / 32L
Commercial fleet or depot use 32X
High-flow diesel with one or two nozzles 32H
Standard retail station with upgrade room 56A / 56L

 

Multi-Nozzle Fuel Dispensers

Four-nozzle, six-nozzle, eight-nozzle, and ten-nozzle dispensers are designed for larger stations with higher traffic, more fueling lanes, or more fuel grades.

These models are usually selected by fuel station operators who want one dispenser to serve multiple vehicles efficiently from the same island. They also make sense for branded forecourts where station image, customer experience, and fueling speed all matter.

Nozzle Quantity Suitable Series
4 nozzles 56A, 56L, 56M, 56T, 56X, 62H, 60T, 60
6 nozzles 56A, 56L, 56M, 56T, 56X, 62H, 60T, 60L
8 nozzles 56M, 56T, 56X, 62H, 60T, 60L
10 nozzles 56M

 

Quick Nozzle Selection Guide

If You Need… Start With These STATION™ Series
One fuel product for private or mobile fueling 20F, 10S, 32Q, 32P
One fuel product with higher diesel flow 32H
Petrol and diesel in one compact unit 32A, 32L, 32Q, 32P
Small retail station setup 32A, 32L, 56A
Four-nozzle standard forecourt dispenser 56A, 56L, 56M, 56T
Large retail station with higher traffic 56M, 56T, 60T, 62H
Commercial fleet, depot, or industrial fueling 32X, 56X, 32H
Cold-climate station project 60L

Choose by Flow Rate

Flow rate matters, but for most fuel station projects, it does not need to be overcomplicated.

Most STATION™ fuel dispenser series are built for standard fueling needs. The standard flow range is 5–50 L/min, which is suitable for normal petrol stations, small forecourts, private fueling sites, rural stations, farms, factories, and fleet yards.

For customers who need faster fueling, selected models can also be configured with an 80 L/min flow option.

 

Need Higher Flow Rate for Commercial Fleets?

If your project involves trucks, buses, mining vehicles, construction machinery, logistics fleets, diesel depots, or other heavy-duty fueling needs, the STATION™ 32H High-Flow Diesel Dispenser is the better starting point.

Unlike standard retail models, the 32H is designed for faster diesel fueling. It offers several flow rate options depending on the project requirement:

  • 100 L/min
  • 120 L/min
  • 160 L/min
  • 180 L/mi
  • 200 L/min
  • 300 L/min

If you are not sure how much flow rate your project needs, do not choose only based on the biggest number. Vehicle type, tank size, fueling frequency, hose/nozzle setup, and site operation all matter.

For a deeper breakdown, read our fuel dispenser flow rate guide.

Dual-Nozzle-High-Speed-Fuel-Dispenser-Interior-Design

Choose by Fuel Type and Fuel Grade

All STATION™ fuel dispenser series can be configured for common fuels such as petrol, diesel, and kerosene.

For most projects, the real question is not whether the dispenser can handle the fuel type. The more useful question is: how many fuel products or grades do you need to dispense from one unit?

  • If you only need one fuel product, such as diesel for equipment, trucks, or private fleet vehicles, a single-nozzle fuel dispenser is usually enough.
  • If you need two fuel products, such as petrol and diesel, a dual-nozzle fuel dispenser is often the most practical choice. This is also one of the most common setups for small fuel stations and private fueling sites.
  • For retail stations that need multiple petrol grades, diesel, or more fueling positions from the same island, a multi-nozzle fuel dispenser will make more sense.
Single-Nozzle-Diesel-Fuel-Dispenser-Pump-for-Sale
Dual-Nozzle-Fuel-Station-Dispenser-for-Sale-in-Colombia
Factory-Direct-Multi-Nozzle-Forecourt-Fuel-Pumps-for-Sale-

Choose by Pump Type: Suction-Type or Submersible-Type

Every STATION™ fuel dispenser series can be built as either a suction-type pump or a submersible-type dispenser. The right choice depends mainly on your tank setup and site installation conditions.

Pump Type Best For Tank Setup Main Advantage

Suction-Type Pump

Suction-Pump-Fuel-Dispenser-Configuration

Small stations, private sites, farms, factories, remote locations, above-ground tank setups Usually above-ground tanks or simple tank layouts Built-in pump, easier installation, practical for smaller projects

Submersible-Type Dispenser

Submersible-Type-Fuel-Dispenser-Interior

Standard retail fuel stations, larger forecourts, multi-dispenser sites, high-frequency operation Usually underground tanks with submersible pump system Better for complete station layouts and long-term retail operation

This choice does not limit your model range. STATION™ models can be configured in both ways, so you can choose the series first, then match it with the right pump type for your site.

For a clearer explanation of the difference, read our fuel dispenser vs fuel pump guide.

Price-Friendly STATION™ Models for Different Budgets

Not every project needs the biggest dispenser or the most advanced forecourt setup from day one.

Some buyers are starting with a small private fueling point. Some need a simple dispenser for a construction site, farm, factory, or fleet yard. Some are building a small retail station and want to keep the first investment under control.

For these projects, choosing a price-friendly STATION™ model can be a smarter move than overbuilding the site too early.

As a fuel dispenser manufacturer, Station Energy Tech offers factory-direct options across different budget levels. Instead of paying extra through multiple trading layers, buyers can start with a basic STATION™ series and only add the functions they really need.

 

Lower-Budget Options to Start With:

Budget Direction Recommended STATION™ Model Best Fit
Lowest-cost mobile fueling option 20F Mobile Series Fuel trucks, mobile delivery, private diesel fueling
Lowest-cost fixed single-nozzle option 10S Small Series Farms, factories, construction sites, above-ground tanks
Lowest-cost dual-nozzle option 32Q Portable Series Two-fuel setups, small industrial sites, container fuel stations
Lowest-cost retail fuel dispenser 32A Retail Series Small petrol stations, rural stations, entry-level retail projects
Lowest-cost multi-nozzle retail option 56A Retail Series Buyers who need 4 or 6 nozzles without moving into a higher-end forecourt model

A lower-priced model does not mean a throwaway product. It just means the design is more focused. You can still customize important details such as fuel type, pump type, nozzle layout, branding, printer, keyboard, hose, management system, and other options based on your project.

If your budget is limited, tell us what the dispenser must do first. Our team can help you avoid paying for features you do not need, while still choosing a model that leaves enough room for your business to grow.

Standard Series, Custom-Built for Your Market

The STATION™ models shown on our website are standard base series. In real projects, many customers do not buy the exact same unit shown on the page. They start with a suitable STATION™ series, then customize the dispenser based on their local market, site layout, fuel products, and operating habits.

As a manufacturer, we can adjust both the appearance and the internal configuration of the dispenser, so the final unit fits your project instead of forcing your project to fit a fixed product.

Application Available Customization
Retail fuel stations Cabinet color, logo, branding, nozzle layout, printer, metal keyboard, payment terminal, vapor recovery, station management system
Fleet yards and depots Fuel management system, IC card, high-flow option, heavy-duty hose and nozzle
Mobile fuel delivery Hose reel, longer hose, 12V / 24V / 220V power options, steel base
Container fuel stations Container size, tank capacity, auto tank gauging system, fire suppression system, solar power system, office room
Cold or harsh environments Heater kits, insulation, anti-rust coating, steel keypad
Branded forecourts Large display, touchscreen, media screen, custom lighting, multi-language interface, payment upgrades

We recommend choosing the base STATION™ series first, then confirming the final configuration with our team.

You can also view our custom fuel dispenser builds for global customers to see how different STATION™ models have been adapted for real projects.

Read Fuel Dispenser Price Guides by Country

Fuel dispenser prices are not the same in every market. Even for the same STATION™ series, the final cost can change based on nozzle quantity, pump type, flow rate, optional functions, local standards, shipping destination, and whether the customer needs only one dispenser or a complete station solution.

That is why we also prepare regional price guides for buyers in different countries. These guides can help you understand common model choices, configuration options, and price factors in your local market before requesting a formal quotation.

Regional Fuel Dispenser Price Guides

These country guides are a useful starting point if you are comparing fuel dispenser prices in your region. But for an accurate quote, the best way is still to send your required configuration.

Our team can then recommend a suitable STATION™ series and prepare a detailed factory-direct quotation based on your project.

Still Not Sure Which STATION™ Fuel Dispenser to Choose?

If you are still comparing different STATION™ series, you do not have to figure everything out alone.

Fuel dispenser selection depends on your real project: where the unit will be installed, what fuel products you need, how many nozzles you want, whether the site uses an above-ground or underground tank, and what level of customization your market requires.

Station Energy Tech is a fuel dispenser manufacturer serving customers worldwide. We provide standard models, factory-direct pricing, custom-built configurations, and complete fueling solutions for retail fuel stations, fleet yards, private fueling sites, mobile fuel delivery, container fuel stations, and high-flow diesel projects.

To get a clear recommendation, send us:

  • Your country or project location
  • Fuel type and fuel grade quantity
  • Required nozzle quantity
  • Expected flow rate
  • Tank setup: above-ground or underground
  • Preferred pump type: suction-type or submersible-type
  • Destination port or delivery location
  • Any custom needs, such as branding, printer, payment terminal, management system, or vapor recovery

Our team can help you choose the right STATION™ series and prepare a detailed quotation based on your actual project.

Contact Us

Looking for expert guidance or a turnkey solution? Whether you need expert advice or a complete, turnkey fueling solution, we're here to help. Just fill out our form or send us an email to get a free consultation and quote from our experts!






    error: